1, the most successful use is carbonated soft drinks (CSD), such as cola, Sprite, etc. CSD bottles have accounted for 1/3 of the total PET bottles.
2, water packaging; Such as mineral water;
3, alcohol beverage packaging: such as wine, beer, brandy, distilled liquor; 4. Dairy products, milk drinks and milk flavored drinks; 5, vegetable protein drinks: such as peanut milk;
6, tea: such as black tea, green tea and some flower tea. 7. Juice drinks;
Due to the technical trend of light weight, good preservation, heat resistance, pressure resistance and other functions, PET bottles have become the main drinking packaging today. Due to its low environmental pollution and energy consumption, PET bottles have gradually replaced traditional packaging materials in today's environmental protection, and have become the most potential packaging materials.
In general, custom biobased fruit fork planning is to seek the convenience of use, but there are special situations. Because of the simplicity of children's cognition and behavior, they often turn on the custom biobased fruit fork of drugs and chemicals when ignored by the guardian, and have adverse consequences of ingestion. Therefore, in the custom biobased fruit fork deliberately planning some operational obstruction, has a deep, vivid social significance, obstruction container planning is a new planning for children's safety, it relies on intelligence rather than strength to open, and then eliminate the potential danger of products to children. For example, the "downward pressure after rotation" type of cover planning of the "Merrill Lynch" children's fever reduction preparation requires that the bottle cap is adjusted to open when it is pressed down together with the rotation, otherwise, no matter how it is rotated, it can not be opened, so that children can prevent accidents. Obstructionist container planning is the most noble planning, which fully embodies the humanized meaning of planning and expresses the ultimate concern for people. To be suitable for the application characteristics of the product, that is to say, the practicality of custom biobased fruit fork planning, which is the primary consideration when planning. The natural characteristics of the contents fit in the structure and shape are the concrete manifestation of practicality. For example, because of the volatile nature of perfume, the mouth of the perfume bottle should be smaller, so that the perfume taste can be preserved more durable, and the dosage can be simply controlled when pouring out. The volume of custom biobased fruit fork is best planned according to the root standard that the average person can drink at a time, which is not a waste of resources, but also easy for customers to take. Because most plastics have notch sensitivity, custom biobased fruit fork cracks and cracks at sharp corners, at the root of the mouth thread, at the neck and other parts, so these parts should be planned into rounded corners. As for the transfer of the rectangular custom biobased fruit fork, it is required to support most of the load of the custom biobased fruit fork, so the wall thickness there is partially added. It is also conducive to the stiffness and load-bearing strength of the custom biobased fruit fork. custom biobased fruit fork printing surface, is the most concentrated part of the customer. Therefore, in order to ensure the stiffness of the custom biobased fruit fork, in addition to selecting the data with high stiffness, the custom biobased fruit fork must be processed
Shape planning enhances stiffness and load-bearing strength of custom biobased fruit fork.
custom biobased fruit fork surface selection label, should make the label surface flat. A "frame" can be planned on the surface of the custom biobased fruit fork, so that the label is accurately positioned and does not move. In blow molding, the part of the billet that is first touched by blowing is always the part that is first hardened. Therefore, the wall thickness in this area is also larger. The edge and corner parts are the parts of the billet that are finally touched by blowing, and the wall thickness of this part is small. The printing appearance should be flat and continuous; Assuming that custom biobased fruit fork contains handle, groove, reinforcement and other structures, the planning should be careful not to cause inconvenience to the printing operation. Oval custom biobased fruit fork, the rigidity is also higher, but the mold production cost is higher. Therefore, the edges and corners of custom biobased fruit fork should be planned to be rounded. Change the outer shape of the custom biobased fruit fork, such as the middle of the custom biobased fruit fork is relatively thin, add the circumferential groove or rib of the outer surface of the custom biobased fruit fork. The rigidity and flexural resistance of custom biobased fruit fork can be obtained. Longitudinal grooves or intensifies
The bar can eliminate the deviation, droop or deformation of custom biobased fruit fork under long-term load.
custom biobased fruit fork https://www.plasticsproduct.com/DisposableCutleries
